Linn Classic Movie System - Manual (Page 4)

ii
12. Power cord protection. Route power cords so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, power sockets, and at the point where they exit from the appliance.
13. Protective attachment plug. As a safety feature the product is equipped with an
attachment plug containing overload protection. Should the plug need replacing
ensure that a replacement is used which has the same overload protection as the
original.
14. Cleaning. The product should be cleaned only as recommended by the
manufacturer.
15. Unplug this apparatus during lightning storms or when unused for long periods of
time.
16. Objects and liquid entry. Take care not to let objects or liquids fall into the product.
17. Damage requiring service. The product should be serviced by qualified personnel if:
a) The power cord or plug has been damaged.
b) Objects or liquid have fallen into the product.
c)
The product has been exposed to rain.
d) The product does not appear to operate normally or exhibits a marked change
in operation.
e) The product has been dropped or the enclosure damaged.
18. Servicing. Don’t attempt to service the product beyond that described in the
operating instructions. All other servicing should be referred to qualified service
personnel.
UK USERS PLEASE READ THIS IMPORTANT SAFETY INFORMATION
Fuse replacement
This appliance is fitted with a non-rewireable 13 Amp mains plug. The plug contains a 5
Amp fuse. If the fuse has blown it can be replaced as follows:
a) Pull out the red fuse cover/carrier.
b) Remove and dispose of the blown fuse.
c) Fit a new 5 Amp BS1362 approved fuse into the carrier and push the carrier
back into the plug.
Always ensure the fuse cover is fitted. If the fuse cover is missing do not use the plug.
Contact your Linn retailer to obtain a replacement fuse cover.
Fuses are for fire protection and do not protect against electric shock.
Mains plug replacement
Should your mains plug need replacing and you are competent to do this proceed as
follows. If you are in doubt contact your Linn retailer or a competent electrician.
a) Disconnect the plug from the mains supply.
b) Cut off the plug and dispose of it safely. A plug with bared conductors is
dangerous if engaged in a live socket.
c) Only fit a 13 Amp BS1363A approved plug with a 5 Amp fuse.
d) The cable wire colours or a letter will be marked at the connection points of
most quality plugs.
Attach the wires securely to their respective points. The Brown wire must go to the Live
pin, the Blue wire must go to the Neutral pin, and the Green/Yellow wire must go to the
Earth pin.
e) Before replacing the plug top ensure that the cable restraint is holding the outer
sheath of the cable firmly and that the wires are correctly connected.
WARNING
THIS APPLIANCE MUST BE EARTHED.
Mains voltage operating range. See technical information section.
Impor
tant S
a
fe
ty
Inf
ormation