Linn AV Personal Handset - Manual (Page 26)

programming the AV Personal Handset
22
(C) Learning keys
Press the programmable key you want to program on the Personal
Handset.
For example to program the PLAY key press PLAY.
The LEARN indicator will flash slowly to show that the Personal Handset is
ready to receive a function from the other infra-red handset.
Press and hold the key you want to learn on the infra-red handset.
For example, if you are programming the Play function press and hold the
Play key on the infra-red handset. The LEARN indicator will flash rapidly on
the Personal Handset indicating that it is receiving the incoming infra-red
signal. Continue to hold the key until:
i) The LEARN indicator begins to flash slowly. This indicates that the key
has not yet been programmed successfully, and you should try again.
ii) The LEARN indicator turns on continuously. This indicates the key has
been programmed successfully and the Personal Handset is now ready to
learn another key for the source you have selected.
Repeat the two steps described above for all the other keys you want to
program onto the AV 5101 Personal Handset for this source.