Lexmark 3455 User Manual
Page 101
101
7.7 Printing IPDS from PSF/400 with OS/400
V3R7, V4R1, V4R2, V4R3, or V4R4
Install the latest cumulative PTF fix pack or tape for the system.
N
PTF 43310, which is available from IBM provides a fix for out of paper
responses from the printer.
1.
Set up and start the TCP/IP network:
N
Create a Token-Ring or an Ethernet line description for the printer
using
CRTLINTRN
or
CRTLINETH
.
N
Add a TCP/IP interface using
ADDTCPIFC
.
N
Add a router definition, if required, using
ADDTCPRTE
.
N
Start TCP/IP using
STRTCP
.
2.
Define a PSF configuration object for your printers using
CRTPSFCFG
. What you
define here is referenced in the printer device description (
CRTDEVPRT
). More
than one printer can use this object. See the example on page 106.
Note:
Only the required fields are listed below.
Type
CRTPSFCFG
and press <F4>. Enter the following information:
PSF configuration
PSFCFG
OPTRAPRT
(OPTRAPRT is a user defined name.)
Library
QGPL
IPDS pass through
IPDSPASTHR
*YES
Release timer
RLSTMR
*SEC15
Text 'description'
TEXT
'
Optra Printer
'
(Optional)