Lexmark 3455 - Manual (Page 120)

120
Number of QUEUE DEVICES:
Leave this at the default value (4 devices) initially. You can tune this option later,
according to the throughput of the printer.
Connect TIMEOUT:
Initially leave this at the default value (30 seconds). Refer to the PSF/AIX on-line
help for information about when to increase this value.
DESCRIPTION:
Enter an optional description for the printer.
3. Press Enter to create the new IPDS printer definition.
Note: You can check the connection by using the enq command to place jobs in
the queue. Example:
enq -P'psfqueue' -odatatype=AFPDS /etc/motd
You can also use the command smit psf_data_type_sel to
queue the job.
See also the chapter Installing a TCP/IP-attached IPDS printer in the IBM AIX
Print Service Facility/6000: Print Administration Version 1.2 manual for further
information about this task.