Lexmark 3455 - Manual (Page 53)

53
4.5.8 Other Env Size
A printer envelope size of Other Envelope may be selected in the printer menu or
Other Envelope may be selected in the IPDS PAPER HANDLING menu when a
non-standard size envelope is loaded into a non-size sensing tray or feeder. This option
allows you to specify the envelope size returned to the host when Other Envelope is
selected in the printer menu as the envelope size. Refer to section 4.5.3 IPDS Envelope
Paper on page 47 for information on how to load envelopes in different printer models.
The envelope size is specified in 300 dots per inch. See section 4.5.7 Universal Size on
page 52 for a conversion example.
Important: The default envelope size value returned to the host is 215.9 x 355.6
mm (8.5 x 14.0 in.). A 34 Short Paper error will be displayed if
printing occurs past the length of the physical envelope. You should
specify the actual envelope size to avoid this error.
Note: This option is only available on IPDS code level 9241 or above.
Menu Option Value Range Function
Envelope
Length 4200*, 1500 to 4200 Specifies Other Envelope length. See note below.
Envelope
Width 2550*, 825 to 2550 Specifies Other Envelope width. See note below.
Note: The printer trays and feeders are limited to feeding of specific
envelope sizes. The IPDS envelope length and width selectable range
is from the smallest to largest size envelopes which can be fed
through the printer. Refer to your printer documentation when
loading a non-standard envelope size to determine if that envelope
size can be fed from that tray or feeder.