Lexmark 3455 User Manual
Page 23
23
3.
Press Select to select the menu or menu item shown on the second line of the
display.
N
If the selection is a menu, the menu is opened and the first printer
setting in the menu is displayed.
N
If the selection is a menu item, the current setting for the menu item is
displayed. (The current user default setting has an asterisk (*) beside
it.)
Each menu item has a list of valid values for the menu item. A value can be:
N
A phrase or word to describe a setting.
N
A numerical value that can be changed.
N
An On or Off setting.
4.
Press Menu> or <Menu to move to the value you need.
5.
Press Select to select the value on the second line of the display. An asterisk
appears beside the value to indicate that it is now the user default setting. The
display shows the new setting for one second and then clears and shows the word
Saved. It then displays the previous list of menu items.
6.
Press Return to go back to previous menus. Then, make additional menu
selections to set new default settings. Press Go once to return to the IPDS MENU
and a second time to return to Ready if this is the last printer setting to change.
User default settings remain in effect until you save new settings or restore the factory
defaults. See section 3.2.5 Activating Saved Option Changes on page 26.
Settings you choose from your IPDS print job may override the user default settings
you select from the printer operator panel.