Lennox Hearth I200 - Manual (Page 39)

A-61167 April 2005 35
Transporting the
scanner
If it becomes necessary to transport the scanner after installation, you must
repack the scanner using the original packaging materials. If you do not have
the original packaging materials, contact your supplier.
1. Power down the computer.
2. Power down the scanner.
3. Disconnect the power cord from the back of the scanner.
4. Disconnect the IEEE-1394 (FireWire) cable from the IEEE-1394 port on
the back of the scanner.
5. Place the foam end caps on each end of the scanner.
6. Place the scanner in the box.
7. Place the power cord and power supply in the box.
8. Tape down the input and output trays to secure them.
9. Close the box.
The scanner is now ready for moving.