Lennox Hearth I200 - Manual (Page 9)

A-61167 April 2005 5
Safety information
• When placing the scanner, make sure that the electrical power outlet is
located within 1.52 metres (5 feet) of the scanner and is easily accessible.
CAUTION: The scanner and power supply must only be used indoors in a
dry location.
• Material Safety Data Sheets (MSDS) for information about chemicals
used in Kodak products are available on the Kodak web site at
www.kodak.com/go/MSDS. Refer to Appendix B, “Supplies,” for
catalog number information.
Warning labels
WARNING: The scanner front panel must be in place and closed during
scanner operation.
The imprinter access door must be in place and closed
during scanner operation, except when changing the
printhead location or replacing the ink cartridge.
When the imprinter access door is removed, DO NOT allow
loose clothing, jewelry, hair, or other objects to enter the
imprinter area.
User precautions
Users and their employer need to observe the common sense precautions
applicable to the operation of any machinery. These include, but are not limited
to, the following:
• Do not wear loose clothing, unbuttoned sleeves, etc.
• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.
• Hair should be kept short, using a hair net if needed or by tying long hair up
in a bun.
• Remove all loose objects from the area that could be drawn into
the machine.
• Take sufficient breaks to maintain mental alertness.
Supervisors should review their practices and make the compliance with
these precautions a part of the job description for the operator of the
Kodak i200 Series Scanners and any other mechanical devices.
CAUTION: High voltage. Avoid contact.
CAUTION: Hot surface. Avoid contact.
CAUTION: Moving parts. Avoid contact.