Linksys Wireless PrintServer WPS11 - Manual (Page 15)

Click the Wireless tab to allow you to view information about the Wireless
PrintServer. No values can be changed on this screen. This screen is for infor-
mation only. Clicking the Refresh button causes the Wireless PrintServer to
retrieve this information again.
The Wireless Page
24
Wireless PrintServer
Click the TCP/IP tab to view or change the TCP/IP values of the Wireless
PrintServer. If you are using DHCP to assign IP addresses, select DHCP
Client. If you need to assign the Wireless PrintServer a Fixed IP Address
(also known as Static IP Address), select this option and enter the appropriate
values under Device IP Address, Router IP Address, and Subnet Mask. To
find your router’s IP address, consult your router’s documentation. The Device
IP Address and Subnet Mask are the same as those of any PC connected to the
network. If you change the Wireless PrintServer’s IP address, make sure you
that you reconnect to the Wireless PrintServer using that new IP address.
Otherwise, you will not be communicating with the Wireless PrintServer.
Under the Connection settings, you can set how long you want the Wireless
PrintServer to delay between attempting connections to the network. You can
also specify the number of times that the Wireless PrintServer will attempt to
make a connection. Enter your chosen values in the boxes provided.
If you want to reset the settings for this screen, you can click the Retrieve
Defaults button to return to the factory default settings.
If you make any mistakes prior to saving, you can simply hit the Cancel but-
ton, which will exit the screen without making any changes.
Once you are certain of any changes you have made, click the Save button to
implement the changes.
The TCP/IP Page
Instant Wireless™ Series
23