Linksys Wireless PrintServer WPS11 - Manual (Page 8)

10
5. Driver installation is now completed but the Print Driver still needs to be
configured. The Wireless-Ready PrintServer will not function properly
until the Print Driver is configured. Check the box beside Configure Print
Driver Now and click the Finish button to continue.
6. Before setting up and configuring the Print Port, follow the directions on
the screen below and click the OK button to continue.
3. Click Next to accept the default Destination Directory, shown below (recom-
mended). If you choose to utilize another directory, click the Browse button
and choose the appropriate directory. Then, click the Next button.
4. The following screen will assign a Program Folder from the Windows
Taskbar. The default Program Folder is the “Linksys PrintServer Driver”. If
you would like to use another name for the Program Folder, type it in the
Program Folders field or select one from the Existing Folders field. Click
the Next button to continue.
Instant Wireless™ Series
9
Wireless PrintServer