Linksys Wireless PrintServer WPS11 - Manual (Page 20)

5. Click Save to create the IPP port on your system. You will see a message con-
firming that the port has been created, then the following dialog:
6. Either select an existing printer to use the new port, and click OK.
OR
Click the Add New Printer button to create a new printer to use the IPP
port. This will start the Add Printer wizard. Follow the prompts to complete
the process. Ensure that the new printer uses the IPP port.
Installation is now complete.
· To create additional IPP Ports, repeat the entire procedure.
· The Proxy Server and other options are set individually for each IPP Port.
Changing the IPP Port Settings
After the IPP port is created, you can reach the Configure IPP Port screen by:
1. Open the Printers folder (Start - Settings - Printers)
2. Right-click the IPP Printer and select Properties.
34
Wireless PrintServer
33
Installing using IPP CLIENT.EXE
1. Run this program to unzip the included files.
2. The IPP Setup program will then run.
3. Follow the prompts to complete the installation.
IPP Client Configuration for Windows 95/98/Millennium/NT 4.0
1. Run the Add IPP Port program entry created by the installation. A screen
like the following will be displayed.
2. If Internet access from your location is via a Proxy Server, check Access IPP
Server via Proxy Server, and enter details of your Proxy Server. (This will be
the same as your Browser configuration.)
3. Enter the IP Address or URL of the IPP Server.
4. Click Select Device Port to view the available ports on the IPP Server and
select the appropriate port. A connection to the IPP Server will be estab-
lished at this time.
Instant Wireless™ Series