Linksys Wireless PrintServer WPS11 - Manual (Page 3)

Table of Contents
Introduction 1
The Instant Wireless ™ Wireless PrintServer 1
Features 1
Package Contents 2
Getting to Know the Wireless PrintServer 3
The Wireless PrintServer’s LEDs 3
The Wireless PrintServer’s Ports 4
Hardware Installation 5
Overview 5
Finding the Wireless PrintServer’s Default Name 5
Finding the Wireless PrintServer’s Node Address 5
Connecting the Wireless PrintServer to Your Network 5
Windows Driver Setup 7
Overview 7
The Autorun Bi-Admin Management Utility Installation 8
Bi-Admin: PrintServer Management 14
Installing the Bi-Admin Management Utility 14
Starting the Bi-Admin Management Utility 14
Using Bi-Admin 16
Setting the PrintServer’s IP Address 17
Changing the Device Name 18
Enabling and Disabling Protocols 18
Attaching Bi-Admin to a Remote Wireless PrintServer 19
Resetting the Wireless PrintServer 19
Restoring Factory Default 19
Configuring the Wireless PrintServer
Using the Web-based Utility
21
Accessing the Web-based Utility 21
The Server Page 22
The Printer Page 22
The TCP/IP Page 23
The Wireless Page 24
The Status Page 25
Advanced Properties 26
The AppleTalk Page 26
The Internet Printing Page 27
The Logical Printers Page 28
The NetBEUI Page 29
The SNMP Page 30
Internet Printing Protocol (IPP) 32
Windows 95/98/Millennium/NT 4.0/2000/XP IPP Client Setup 32
DHCP Support for the Wireless PrintServer 38
Troubleshooting 39
Hardware Issues 39
General Printing Issues 39
Appendix 40
About Bi-directional Printing 40
About the Wireless PrintServer’s Software 41
Glossary 42
Specifications 49
Environmental 50
Warranty Information 51
Contact Information 52
Instant Wireless™ Series Wireless PrintServer