Lifescan OneTouch Basic Basic Blood Glucose Monitoring System - Manual (Page 66)

MESSAGE APPEARS WHEN
The meter is turned on and you have not previously coded
the meter. This is a reminder that you should verify that the
code displayed on the meter matches the code on the test
strip vial before testing. If it does not, reset by pressing the
C button.
The meter is turned on. This is a reminder that prior to
testing you should verify that the code displayed on the
meter matches the code on the test strip vial. If it does not,
reset by pressing the C button.
The meter is ready to perform a blood, check strip, or control
solution test. insert
c o d e 1 0
(Example)
strip
check
code
code--
58
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 58