Lifescan OneTouch Basic Basic Blood Glucose Monitoring System - Manual (Page 72)

MESSAGE PROBLEM WHAT TO DO
Repeat the test with a new
test strip. Wait for the word
insert before inserting a
test strip. The test strip was inserted
before the word insert
appeared on the display. remove
strip
1. Clean the test area and
test strip holder according
to instructions.
2. Repeat the test. Keep the
meter’s test area clear.
3. Move the meter away from
the light source. Repeat the
test with a new test strip.
1. There is dirt, blood, or lint on
the test area.
2. Your hand or an object covered
the test area while the meter
was turned on.
3. The meter was used in very
bright light.
clean
test
area
64
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 64