Lifescan OneTouch Basic Basic Blood Glucose Monitoring System - Manual (Page 83)

Step 2: Clean the Test Strip Holder.
Wash only the test strip holder with
soap and water.
Clean the underside of the test
strip holder. Using a damp cotton swab,
clean the small hole from both sides to
remove any dirt, blood, or lint. Rinse
well. Dry completely with a soft cloth
or tissue.
Step 3: Clean the Test Area.
The following cleaning agents will
damage the meter.
DO NOT USE:
■ Alcohol
■ Cleansers with ammonia or phenol
■ Windex ® or other glass cleaners
■ Abrasive cleansers
Windex is a registered trademark of The Drackett Products Company.
CAUTION: Do not get water inside
the meter. Do not immerse meter
in water.
75
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 75