Lincoln Electric AC-225C - Manual (Page 152)

Recommended General Options
www.lincolnelectric.com
Engine Drive, con’t.
154
Docking Kit
Secures the K2642-1 Polarity/
Multi-Process Switch to the
engine-driven welder roof.
Release latch permits removal
of K2642-1 Polarity/ Multi-
Process Switch. Made from
stainless steel for rust-free
operation. For all Lincoln
Chopper Technology
® engine-
driven welders.
Order K2663-1 for Ranger
®
250, Ranger ® 250 LPG,
Ranger ® 305 G, Ranger ®
305 D, Vantage ® 300,
Vantage ® 400, Vantage ® 500,
Air Vantage ® 500.
UNDERCARRIAGES
Hand Moving
Undercarriage
For moving by hand.
Order K882-2 for Power Arc
®
5500, Weldanpower ® 125
Hand Moving
Undercarriage
For moving by hand. Overall
width 27" (0.7 m). Includes
heavy-duty puncture-resistant
tires.
Order K889-2 for Ranger
®
10,000 Plus, Ranger ® 10,000,
Ranger ® 3 Phase
Hand Moving
Undercarriage
Includes no-flat puncture proof
tires. For moving by hand.
Overall width 27" (0.7m).
Order K889-3 for Ranger
®
10,000 Plus, Ranger ® 10,000,
Ranger ® 3 Phase
All-Terrain Undercarriage
For moving by hand at con-
struction sites. Maneuvers
over obstacles. Heavy-duty
puncture-resistant tires.
Order K1737-1 for Ranger
®
10,000 Plus, Ranger ® 10,000,
Ranger ® 3 Phase, Ranger ® 250
GXT, Ranger ® 250, Ranger ®
305 G
Factory Undercarriage
For moving by hand on smooth
surface floors. Heavy-duty,
puncture-resistant tires and
front caster. Convenient
steering handle.
Order K1770-1 for Ranger
®
10,000 Plus, Ranger ® 10,000,
Ranger ® 3 Phase, Ranger ® 250
GXT, Ranger ® 250, Ranger ®
250 LPG, Ranger ® 305G
MISCELLANEOUS KITS
Control Panel Cover Kit
Clear Plexiglas cover to protect
control panel from dirt and
debris, and to visually monitor
machine operation. Lockable
to deter vandalism.
Order K2356-1 for Vantage
®
500, Air Vantage ® 500
Air Dryer Kit
Minimizes water content in
supply air. Avoids cold weather
air hose ice up and water
condensation in air tools during
humid weather. Highly recom-
mended for use with plasma
cutter. Installs inside the
machine for compact operation.
Order K2354-1 for
Air Vantage
® 500
Digital Weld Meters Kit
Easy-to-read digital meters for
volts and amps. Easy to install.
Order K2467-1 for Vantage
®
300. (K2409-1 and K2499-1)
Stainless Steel Sheet
Metal Kit
Stainless steel roof and doors.
Also includes decals (mounted),
door latches, door hooks,
bumpers and all required
mounting hardware.
Order K2423-1 for Pipeliner
®
200D, (K6090-9 thru -10),
Classic
® 300D (K1643-1
thru -6)
Polarity/Multi-Process
Switch
For easy polarity switching.
Example: DC- stick root pass on
pipe and DC+ stick for hot, fill
and cap passes. Also for an
easy process change. Example:
DC+ stick root pass on pipe and
DC- Innershield
® self-shielded
flux-cored wire for hot, fill and
cap passes. 6 and 14-pin
remote connections can be
made to this unit. For all
Lincoln Chopper Technology
®
engine-driven welders. Mounts
on roof with K2663-1 Docking
Kit.
Order K2642-1 for Ranger
®
250, Ranger ® 250 LPG,
Ranger ® 305 G, Ranger ® 305 D,
Vantage ® 300, Vantage ® 400,
Vantage ® 500, Air Vantage ®
500
SPARK ARRESTOR KITS,
CON’T.
Spark Arrestor Kit
Attaches to muffler exhaust
tube. Virtually eliminates
spark emissions.
Order K903-1 for Pipeliner
®
200D (Kubota ® ), Classic ®
300D (Perkins ® & Kubota ® ),
Vantage ® 400
Spark Arrestor Kit
Attaches to muffler exhaust
tube. Virtually eliminates
spark emissions.
Order K894-1 for Ranger
®
10,000 Plus, Ranger ® 10,000,
Ranger ® 3 Phase
Lockable Fuel Cap/Flash
Arrestor Kit
For use in locations where
flash arrestor safety is
required. Lockable fuel cap
prevents tampering with fuel.
Green cap color provides a
visual reminder to use diesel
when refueling.
Order K2340-1 for Vantage
®
500, Air Vantage ® 500
WIRE FEEDER CAPABILITY
CV Adapter
Provides constant voltage
output for semiautomatic
wire welding. Includes 14-pin
MS-Type connection and
local/remote switch.
Order K385-2 for SAE-400
LN-23P Interface Kit
Required for connecting LN™-
23P to the K385-2 CV
Adapter. Includes 50 ft.
(15.2m) control cable.
Order K2379-1
Wire Feed Module
Provides constant voltage
(CV) output with improved arc
stability for Innershield weld-
ing. Also excellent for MIG
welding. Easy installation.
The recommended wire
feeder is the LN
™ -25.
Order K623-1 for Pipeliner ®
200D, Classic ® 300D