Lincoln Electric AC-225C - Manual (Page 66)

Semiautomatic Wire Feeders
www.lincolnelectric.com/wire-feeders
LN ™ -10
The LN ™ -10 semiautomatic wire feeder features the revolutionary split wire guide which
precisely aligns and supports the wire through the entire feeding system. The system
also features a rugged 4 driven roll design for positive wire feeding. The LN
™ -10’s
modular design provides for many mounting options, including boom mounting.
Single Header Wire Feeder
• Standard dual procedure allows operator to set
different voltage and wire feed speeds and
switch between the two.
• Selectable trigger control for standard 2-step,
interlocking 4-step, spot weld and cold feed
trigger control.
• Digital Display standard.
• Preflow/Postflow/Burnback and Spot Timer
standard.
• Three-year warranty on parts and labor.
DH-10
Precision times two! This DH-10 dual wire feeder utilizes Lincoln’s ® revolutionary split wire guide
system to precisely align and feed wire, and its dual wire feeder system allows you to weld with
two different wires, with two different welding procedures using one power source.
Double Header Wire Feeder
Processes
• MIG
• Flux-Cored
• Submerged Arc
Output Input
Bench Model (Std./Std. Speed)
Includes
• Control Cable, 10 ft. (3.0 m)
Required Options
• Drive Roll Kit
• Weld Power Cable
Key Options
• K1501-10 Control Cable
• K1798 Terminal Strip Adapter
Cable
• K1785-12 Control Cable
(Heavy Duty), 12 ft. (3.6 m)
• K1785-16 Control Cable
(Heavy Duty), 16 ft. (4.8 m)
• Fume Extraction System
•
More options at end of section
Literature
E8.200
Processes
• MIG
• Flux-Cored
Output Input
Bench Model (Standard Speed)
Includes
• Control Cable, 10 ft. (3.0 m)
Required Options
• Drive Roll Kit
• Weld Power Cable
Key Options
• K1501-10 Control Cable
• K1798 Terminal Strip Adapter
Cable
• K1785-12 Control Cable
(Heavy Duty), 12 ft. (3.6 m)
• K1785-16 Control Cable
(Heavy Duty), 16 ft. (4.8 m)
• More options at end of section
Literature
E8.200
Product Product Wire Feed Speed Range Wire Size Range H x W x D Net Weight
Name Number ipm (m/min) in (mm) in. (mm) lbs.(kg)
LN ™ -10 Bench Model K1559-3 Low Gear: Solid: .023-5/64 (0.6-2.4) 16 x 15 x 31 65
(Standard Speed) 35-750 (0.8-19.0) Cored: .035-1/8 (0.9-3.2) (406 x 381 x 787) (29.5)
LN ™ -10 K1564-4 High Gear: Solid: .023-1/16 (0.6-1.6)
Generic Boom Package 50-750 (1.3-19.0) Cored: .035-5/64 (0.9-2.0)
Product Product Wire Feed Speed Range Wire Size Range H x W x D Net Weight
Name Number ipm (m/min) in. (mm) in. (mm) lbs.(kg)
DH-10 K1499-3 35-750 Solid: .023-3/32 (0.6-2.4) 21 x 20 x 32 98
(0.8-19.0) Cored: .030-1/8 (0.8-3.2) (521 x 502 x 800) (44.4)
DH-10 K1521-7
Generic Boom Package
DH-10 K1499-4 Std: 35-750 Solid: .023-3/32 (0.6-2.4)
(Std./High Speed) (0.8-19.0) Cored: .030-1/8 (0.8-3.2)
High: 55-1250 Solid: .023-1/16 (0.6-1.6)
(1.3-31.7) Cored: .035-5/64 (0.9-2.4)
42
VAC
42
VAC
• Each side of the DH-10 wire drive system is driven by its
own motor and gear box for confidence that the feeder
won’t go down.
• Split wire guide and 4 driven rolls for positive wire feeding.
• Presettable voltage and wire feed speed for extra control.
• Standard dual procedure allows operator to set
different voltage and wire feed speeds and switch
between the two.
• Selectable trigger control for standard 2-step,
interlocking 4-step, spot weld and cold feed
trigger control.
• Digital Display standard.
• Preflow/Postflow/Burnback & Spot Timer
standard.
• Three-year warranty on parts and labor.
68