Lincoln Electric AC-225C - Manual (Page 156)

Recommended General Options
www.lincolnelectric.com
MIG Wire Feeder/Welder
158
Power MIG ® 215:
Magnum ® Spool Gun
w/Adapter Module & Gun
Holder
This spool gun accommodates
1 lb. (0.5 kg) spools of alu-
minum wire and features vari-
ous speed adjustments at the
gun. Complete kit includes
spool gun holder, gas hose kit
and easy spool gun connec-
tion in wire drive compart-
ment.
Order K1809-1
Power MIG ® 350MP:
Magnum ® 250LX Spool Gun
300 amps, 60% duty cycle.
Feeds .035-3/64” dia. alu-
minum wire on 2 lb. spools.
Order K2490-1
Spool Gun Holder
Provides neat storage of
spool gun cable, and gas hose
on power source.
Order K1738-1
POWER MIG ® TIMER KIT
Timer Kit
Adds 4-step trigger interlock,
spot mode, adjustable run-in
speed for smoother arc start-
ing, and adjustable burnback
time to minimize wire sticking
in puddle. Easy to install.
Order K1701-1 for
Power MIG
® 255C
Spot Timer Kit
This timer allows you to set a
fixed weld time of up to 10
seconds that is initiated when
you pull the gun trigger. Ideal
for making consistent spot
welds on thin sheet metal.
Order K2525-1 for Power
MIG
® 140C, Power MIG ®
180C
3/64" Aluminum Feeding Kit
Conversion kit for welding
with 3/64" (1.2mm) aluminum
wire. Includes drive rolls, con-
tact tips (qty. 2), non-metallic
guides and cable liner.
Order K1703-1 for Power
MIG
® 215, Power MIG ® 255C
3/64" Aluminum Feeding Kit
Conversion kit for welding
with 3/64" (1.2 mm) alu-
minum wire. Includes drive
rolls, contact tips (qty. 2),
polished wire guides and
cable liner.
Order K2153-1 for
Power MIG
® 350 MP
POWER MIG ® SPOOL GUN
SYSTEMS
Power MIG ® 255C:
Magnum ® SG Spool Gun
Lightweight, well-balanced,
semiautomatic spool gun
designed primarily for easy,
accurate aluminum wire
feeding.
Order K487-25
Magnum ® SG Spool Gun
Control Cable Adapter Plug
Allows K487-25 Magnum
®
spool gun’s 6-pin control
cable to plug into the Power
MIG
® 255C’s 7-pin spool gun
control receptacle.
Order K2445-1
OR
Magnum ® 250LX Spool Gun
300 amps, 60% duty cycle.
Feeds .035-3/64” dia. alu-
minum wire on 2 lb. spools.
Order K2490-1
Power MIG ® 140C & 180C
and SP-140T & SP-180T:
Magnum ® 100SG Spool Gun
Designed to easily feed 4"
(102 mm) diameter 1 lb. (0.45
kg) spools of .030" (0.8 mm)
or .035" (0.9 mm) diameter
SuperGlaze
® aluminum MIG
wire. Includes gun, adapter
kit, .035" (0.9 mm) contact
tips (qty. 3), gas nozzle, and
a 1 lb. (0.45 kg) spool of
SuperGlaze
® 4043 .035" (0.9
mm) MIG wire. Packaged in
a convenient carrying case.
Order K2532-1
WELDING KITS
.035" Aluminum Welding
Kit
Includes drive roll, non-metal-
lic cable liner and contact tips
(qty. 6) for feeding .035" (0.9
mm) aluminum MIG wire.
Also includes 1 lb. spool of
SuperGlaze
® 4043 aluminum
MIG wire.
Order K664-2 for SP-135T,
SP-175T
.035" Innershield ® Welding
Kit
Includes everything needed
for Magnum
® 100L gun and
cable to use .035" (0.9 mm)
diameter flux-cored wire.
Includes a contact tip, gasless
nozzle, cable liner, and a
10 lb. (4.5 kg) spool of .035"
(0.9 mm) Innershield
®
NR ® -211-MP wire.
Order K549-1 for SP-135T,
SP-175T
.045" Innershield ® Welding
Kit
Includes everything needed
for Magnum
® 100L gun and
cable to use .045" (1.2 mm)
diameter flux-cored wire.
Includes a .045" (1.2 mm)
knurled drive roll, contact tip,
gasless nozzle, cable liner,
and a 10 lb. (4.5 kg) spool of
.045" Innershield NR
® -211-MP
wire.
Order K549-2 for SP-175T
.045" Innershield ® Welding
Kit
Includes everything needed to
weld with .045" (1.1 mm)
Innershield
® self-shielded
flux-cored wire. Includes an
.035"-.045" (0.9-1.1 mm)
Magnum
® 100L gun liner, a
.045" (1.1 mm) contact tip, a
gasless nozzle, knurled drive
roll, .045" (1.1 mm) inner wire
guide and 10 lb. (4.5 kg) spool
of .045" (1.1 mm) Innershield
®
NR ® -212 wire.
Order K2528-1 for
Power MIG
® 180C