Lincoln Electric AC-225C - Manual (Page 18)

SP-140T
120 Volt AC Input Compact Wire Welder
SP-180T
More Power for Thicker Material
Product Product Input Power Rated Output Input Current @ H x W x D Net Weight
Name Number Voltage/Phase/Hertz Current /Voltage/Duty Cycle Rated Output Output Range inches (mm) lbs.(kg)
SP-140T K2688-1 120/1/60 90A/19.5V/20% 20A 30-140 Amps DC 14 x 10.15 x 18.6 58
(Tapped Voltage 50-500 ipm WFS (357 x 258 x 472) (26.3)
Control) (1.3-12.7 m/min)
Max. OCV: 33
Product Product Input Power Rated Output Input Current @ H x W x D Net Weight
Name Number Voltage/Phase/Hertz Current /Voltage/Duty Cycle Rated Output Output Range inches (mm) lbs.(kg)
SP-180T K2689-1 208/230/1/60 208: 130A/17V/30% 20A 30-180 Amps DC 14 x 10.15 x 18.6 66
230: 130A/20V/30% 50-500 ipm WFS (357 x 258 x 472) (30)
(1.3-12.7 m/min)
Max. OCV: 33V
DC 1
PHASE
60
Hz
CV
DC 1
PHASE
60
Hz
CV
Here’s a great little welder for project and repair welding with MIG on mild steel or stainless
and flux-cored on mild steel.
• Ready to Weld! Includes mild steel MIG AND flux-
cored wire spools, regulator and basic handshield.
Just add shielding gas (Sold separately).
• Easy to Set – 5 position tap voltage control and
continuous full-range wire feed speed control
help you dial in your application.
• Wide 30-140 amp welding output range.
• MIG weld 24 gauge up to 10 gauge (.135")
sheet metal in a single pass. Weld up to
5/16" steel using self-shielded Lincoln
Innershield
® wire (FCAW-S).
• Spool Gun Ready – add the optional
Magnum ® 100SG spool gun for reliable
aluminum wire feeding.
• Three-year warranty on parts and labor.
Just plug this compact wire welder into a 208 or 230V outlet in your garage, barn or shop
and start welding– up to 3/16”with MIG welding and 1/2” with gas-less flux-cored welding.
Processes
• MIG
• Flux-Cored
Output Input
Unit Includes
• Magnum
® 100L gun 10 ft. (3.0 m)
• .025" (0.6 mm) Contact Tips (Qty. 3)
• .035" (0.9 mm) Contact Tips (Qty. 3)
• Gasless Nozzle for Innershield
®
• Gas Nozzle for MIG
• Spindle Adapter, 8" (203 mm)
Dia. Spools
• .025"-.030" (0.6-0.7 mm) MIG
Drive Roll
• .035" (0.9 mm) MIG Drive Roll
• .030"-.045" (0.7-1.1 mm) Knurled
Drive Roll
• Adjustable Gas Regulator & Hose
• 2 lb. (0.90 kg) Spool of SuperArc ®
L-56 ® MIG wire
• 1 lb. (0.45 kg) Spool NR ® -211-MP
• Work Clamp & 10 ft. (3.0 m) Cable
• Handshield
• How to Use DVD
Key Options
•
More options at end of section
Literature
E7.41
Processes
• MIG
• Flux-Cored
Output Input
Unit Includes
• Magnum
® 100L gun 10 ft. (3.0 m)
• .025" (0.6 mm) Contact Tips (Qty. 3)
• .035" (0.9 mm) Contact Tips (Qty. 3)
• Gasless Nozzle for Innershield
®
• Gas Nozzle for MIG
• Spindle Adapter, 8" (203 mm)
Dia. Spools
• .025"-.030" (0.6-0.7 mm) MIG
Drive Roll
• .035" (0.9 mm) MIG Drive Roll
• .030"-.045" (0.7-1.1 mm) Knurled
Drive Roll
• Adjustable Gas Regulator & Hose
• 2 lb. (0.90 kg) Spool of SuperArc ®
L-56 ® MIG wire
• 1 lb. (0.45 kg) Spool NR ® -211-MP
• Work Clamp & 10 ft. (3.0 m) Cable
• Handshield
• How to Use DVD
Key Options
•
More options at end of section
Literature
E7.42
• Ready to Weld! Includes both mild steel MIG AND flux-
cored wire as well as an adjustable gas regulator.
Just add shielding gas (sold separately).
• Easy to Set – 5 position tap voltage control and
continuous full-range wire feed speed control
help you dial in your application.
• Wide 30-180 amp welding output range –
use .025" wire on the thinnest sheet metal
up to .045" flux-cored wire on thick plate.
• MIG weld 24 gauge up to 3/16" sheet
metal in a single pass. Weld up to 1/2"
steel using self-shielded Lincoln
Innershield
® wire (FCAW-S).
• Spool Gun Ready – add the optional
Magnum ® 100SG spool gun for reliable
aluminum wire feeding.
• Three-year warranty on parts and labor.
www.lincolnelectric.com/mig-welders
MIG: Wire Feeder/Welders
20