Eof and home position sensors test, Eof and home position sensors test -2, Eof and home position sensors – Lexmark 1020 User Manual
Page 27
Advertising
Diagnostic Aids 3-2
4078-00X
EOF and Home Position Sensors Test
This test allows the servicer to test the function of the End-of-Form
and Home Position sensors.
To run the test:
1. With the printer off and the End-of-Form Flag out of the sensor,
press and hold the following buttons while turning the printer on:
2. Paper Feed
3. Install Print Cartridge
After five seconds, release the buttons to begin the test.
The Busy light goes on and off as the End-of-Form flag is moved into
and out of the End-of-Form sensor.
The Power light goes on and off as the Carrier flag is moved into and
out of the Home Position sensor.
Advertising