Initialize error log, Initialize error log -3 – Lexmark 1020 User Manual
Page 28
Advertising
3-3
4078-00X
Initialize Error Log
This test tracks intermittent errors.
Use this procedure to reset the error log to zero. The error log is
especially helpful in diagnosing intermittent or difficult problems.
The test is complete when power is turned off.
To run the test:
1. Place a sheet of paper in the sheet feeder far enough to push
the End-of-Form flag out of the sensor.
2. With the printer off, hold down the Install Print Cartridge
button
while turning the printer on.
Advertising