LevelOne FBR-1404TX - Manual (Page 14)

Setup
Setup Wizard
The first time you connect to the LevelOne Broadband VPN Gateway, the Setup Wizard will
run automatically. (The Setup Wizard will also run if the LevelOne Broadband VPN Gate-
way's default setting are restored.)
1. Step through the Wizard until finished.
• You need to know the type of Internet connection service used by your ISP. Check
the data supplied by your ISP.
• The common connection types are explained in the tables below.
2. On the final screen of the Wizard, run the test and check that an Internet connection can be
established.
3. If the connection test fails:
• Check your data, the Cable/DSL modem, and all connections.
• Check that you have entered all data correctly.
• If using a Cable modem, your ISP may have recorded the MAC (physical) address of
your PC. Run the Wizard, and on the Cable Modem screen, use the "Clone MAC ad-
dress" button to copy the MAC address from your PC to the LevelOne Broadband
VPN Gateway.
Common Connection Types
Cable Modems
Type Details ISP Data required
Dynamic
IP Address Your IP Address is allocated
automatically, when you
connect to you ISP. Usually, none.
However, some ISPs may
require you to use a particular
Hostname, Domain name, or
MAC (physical) address.
Static (Fixed)
IP Address Your ISP allocates a perma-
nent IP Address to you. IP Address allocated to you,
mask and gateway (if provided),
and DNS address.
Some ISP's may also require
you to use a particular Host-
name, Domain name, or MAC
(physical) address.
DSL Modems
Type Details ISP Data required
Dynamic
IP Address Your IP Address is allocated
automatically, when you
connect to you ISP. None.
Static (Fixed)
IP Address Your ISP allocates a perma-
nent IP Address to you. IP Address allocated to you,
mask and gateway (if provided),
and DNS address.
11