LevelOne FBR-1404TX - Manual (Page 91)

LevelOne Broadband VPN Gateway User Guide
Example 2: Windows 2000/XP Client to LAN
In this example, a Windows 2000/XP client connects to the LevelOne Broadband VPN Gate-
way and gains access to the local LAN.
Figure 63: Windows 2000/XP Client to LevelOne Broadband VPN Gateway
To use 3DES encryption, you need Service Pack
3 or later installed on Windows 2000.
LevelOne Broadband VPN Gateway Configuration
Setting Value Notes
Name Win Client Name does not affect operation. Select a
meaningful name.
Remote Endpoint 172.16.9.10 Other endpoint's WAN (Internet) IP address.
Local
IP addresses Subnet address:
192.168.0.0
255.255.255.0 Allows access to entire LAN. Use a more
restrictive definition if possible.
Remote
IP addresses 172.16.9.10 For a single client, this is the same as the
Gateway.
Key Exchange IKE Must match
IKE SA Parameters
IKE Direction Responder Only want to accept client connections.
Local Identity IP address Required.
Remote Identity IP address Required
IKE Authentication
method Pre-shared Key Certificates are not widely used.
Pre-shared Key Xxxxxxxxxx Must match client PC
IKE Authentication
algorithm SHA-1 Must match client PC
IKE Encryption 3DES Must match client PC
IKE Exchange
mode Main Mode Must match client PC
88