LevelOne FBR-1404TX - Manual (Page 9)

Chapter 2
Installation
This Chapter covers the physical installation of the LevelOne Broadband
VPN Gateway.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable
modem (for WAN port usage)
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the LevelOne Broadband VPN Gateway.
Ensure the LevelOne Broadband VPN Gateway and the DSL/Cable modem are powered
OFF.
2. Connect LAN Cables
• Use standard LAN cables to connect PCs to the Switching Hub ports on the LevelOne
Broadband VPN Gateway. Both 10BaseT and 100BaseT connections can be used simulta-
neously.
• If required, you can connect any LAN port to another Hub. Any LAN port on the Leve-
lOne Broadband VPN Gateway will automatically function as an "Uplink" port when
6