LevelOne FBR-1404TX - Manual (Page 98)

VPN
19. Click "Close" to return to the DUT to Win2K properties screen. The "To DUT" filter
should now be listed, as shown below.
Figure 75: Windows 2000/XP Client to LevelOne Broadband VPN Gateway
20. To add the second (outgoing) rule, click "Add". For the name, enter "To Win2K", then
click "Add".
Figure 76: Windows 2000/XP Client to LevelOne Broadband VPN Gateway
21. Enter the Source IP address and the Destination IP address as shown below.
• Since this is the incoming filter, the Source IP address is the address range used on
the remote LAN and the Destination IP address is "My IP address".
• Ensure the Mirrored option is checked.
95