Common vpn situations – LevelOne FBR-1404TX User Manual

Page 72

Advertising
background image

VPN

Common VPN Situations

VPN Pass-through

Figure 44: VPN Pass-through

Here, a PC on the LAN behind the Router/Gateway is using VPN software, but the
Router/Gateway is NOT acting as a VPN endpoint. It is only allowing the VPN connection.
• The PC software can use any VPN protocol supported by the remote VPN.
• The remote VPN Server must support client PCs which are behind a NAT router, and so

have an IP address which is not valid on the Internet.

• The Router/Gateway requires no VPN configuration, since it is not acting as a VPN

endpoint.

Client PC to VPN Gateway

Figure 45: Client PC to VPN Server

In this situation, the PC must run appropriate VPN client software in order to connect, via the
Internet, to the LevelOne Broadband VPN Gateway. Once connected, the client PC has the
same access to LAN resources as PCs on the local LAN (unless restricted by the network
administrator).
• IPsec is not the only protocol which can be used in this situation, but the LevelOne Broad-

band VPN Gateway supports IPsec ONLY.

• Windows 2000 and Windows XP include a suitable IPsec VPN client program. Configura-

tion of this client program for use with the LevelOne Broadband VPN Gateway is covered
later in this document.

69

Advertising