LSI SAS6160 - Manual (Page 21)

LSI Corporation | September 2010 Page 21
LSISAS6160 SAS Switch User Guide Chapter 1: Overview | Connecting Devices to the SAS6160 Switch
The sixth example ( Figure 15 ) shows a daisy chain, or cascaded, switch configuration,
with four SAS6160 switches. This example assumes that various SAS targets and SAS
initiators are attached to the other connectors on the switches.
Figure 15: Example 6, Cascaded Switches
Like in Example 3, the cables in this example can run from any connector of the
downstream switch to any connector in the switch above it. The cascade sequence is
limited to four switches.