LSI SAS6160 - Manual (Page 26)

Page 26 LSI Corporation | September 2010
LSISAS6160 SAS Switch User Guide Chapter 2: Installation and Hardware Setup | Installing the SAS6160 Switch
3. Bolt the shelf onto the vertical rails in the rack, as shown in the following figure.
Figure 4: Mounting Shelf in a Rack
The mounting ears on the shelf rails are threaded, so place them on the inside of the
vertical rack rails, and insert the bolts from the outside, as shown.
The mounting ears on the shelf itself are not threaded, so mount them with clip
nuts.
4. Finally, place the SAS6160 switch and its inline power supply on the shelf. The
switch enclosure fits onto a raised rib on the shelf to hold it securely in place.
When power is available at the connector side of the switch, route power cords
along the enclosure on the far left or far right of the shelf.
The SAS6160 switch is now ready for connection to a host.