4 configure ip – LSI SAS6160 User Manual
Page 58
Advertising
Page 58
LSI Corporation
|
September 2010
LSISAS6160 SAS Switch User Guide
Chapter 3: SAS Domain Manager Graphical User Interface
|
Devices Tab
3.7.6.4
Configure IP
Use the Configure IP command to change the IP address for the LSI SAS2 switch that is
currently selected in the device tree. You can set either a static or a dynamic IP address
as shown in the following figures.
Figure 23:
Set a Static IP Address
Figure 24:
Set a Dynamic IP Address
Advertising