LSI SAS6160 - Manual (Page 55)

LSI Corporation | September 2010 Page 55
LSISAS6160 SAS Switch User Guide Chapter 3: SAS Domain Manager Graphical User Interface | Devices Tab
3.7.5 Zone Group Tab The Zone Group tab becomes active if there is an active zone set, and if you click on an
end device. In the following figure, the Zone Group tab is active because the selected
initiator is a member of an active zone set. In the device tree, the devices that may
communicate appear in blue. There are two sections in the Zone Group tab:
„ The Zone Group Membership section shows the zone group to which the selected
device belongs.
„ The Zone Group Permission section shows that zone_group_1 may communicate
with zone_group_2.
Figure 19: Zone Group Tab