Linear AE-100 - Manual (Page 18)

18
PPN 33
33#CODE#CODE#
CODE = THE STAND-ALONE ENTRY CODE TO DELETE
CODE = THE STAND-ALONE ENTRY CODE
AGAIN FOR VERIFICATION
DELETING A STAND-ALONE ENTRY CODE
PPN 31
31#CODE#CODE#
CODE = NEW STAND-ALONE ENTRY CODE
CODE = NEW STAND-ALONE ENTRY CODE
AGAIN FOR VERIFICATION
ADDING A STAND-ALONE ENTRY CODE
PPN 38
38#LANG#
LANG = SYSTEM DISPLAY LANGUAGE
1 = ENGLISH 2 = SPANISH
3 = FRENCH 4 = PORTUGUESE
SYSTEM DISPLAY LANGUAGE
FACTORY SETTING: ENGLISH
Stand-alone Entry Code Programming
A Stand-alone Entry Code is a number entered at the AE-100 keypad to
request access. Up to 125 4-digit Stand-alone Entry Codes can be set.
✦ NOTE: Each Stand-alone Entry Code programmed reduces the
possible number of Directory Entries by one.
Use the programming worksheet supplied to organize the
Stand-alone Entry Code data prior to entering it into the system.
For each of the following steps, enter the Master Password and enter
Programming Mode (if the unit is not already in that mode). Exit
Programming Mode when all programming is complete.
Adding a Stand-alone Entry Code
Stand-alone Entry Codes are entered individually.
1. Press
2. Enter the new Stand-alone Entry Code.
3. Press
4. Enter the new Stand-alone Entry Code again for verifi cation.
5. Press
Deleting a Stand-alone Entry Code
Stand-alone Entry Codes can be deleted individually (to delete all
Stand-alone Entry Codes, see programming Step 93).
1. Press
2. Enter the Stand-alone Entry Code to delete.
3. Press
4. Enter
the Stand-alone Entry Code to delete again.
5. Press
System Options
For most installations the factory settings for the system will be
appropriate. To customize the system, enter programming mode via
telephone or keypad.
Use the programming worksheet supplied to log any system option
changes prior to entering it into the system.
For each of the following steps, enter the Master Password and enter
Programming Mode (if the unit is not already in that mode). Exit
Programming Mode when all programming is complete.
System Display Language
The factory default language is English. Three other languages can be
selected as the language for the user and programming displays.
✦ NOTE:This step cannot be performed remotely through the
telephone.
✦ NOTE: The system supports one display language at a time.
1. Press
2. Choose a language:
Enter 1 for English •
Enter 2 for Spanish •
Enter 3 for French •
Enter 4 for Portuguese •
3. Press
STANDARD PROGRAMMING METHOD