Lexicon MPX G2 - Manual (Page 102)

7-11
The Effects and Parameters
Mix* 0-100% Dry/Wet ratio
Level* Off, -89 to +6dB Amount of effect in the processed signal
Pan 1* 50L to C to 50R Left input panner
Pan 2* 50L to C to 50R Right input panner
Mix* 0-100% Dry/Wet ratio
Level* Off, -89 to +6dB Amount of effect in the processed signal
Rate* 0-50Hz or Pan rate or period ratio
1:24-24:1 cycles/beat
(Rate Units) Selects frequency or cycles/beat
PW* 0-100% Pan pulse width
Depth* 0-100% Pan depth
Phase 0°-270° Phase difference between right and left pan
Auto Pan is a version of Panner
with the pans controlled by a local
LFO. The left input is panned by
the LFO’s sine output. The right
input is panned by the cosine out-
put, which is offset by 0°, 90°,
180° or 270° by the Phase param-
eter.
The Panner effect has the left in-
put panned to outputs with Pan 1,
right input with Pan 2. Because all
the parameters of this effect are
interpolated, this can be used to
add interpolated outputs to effects
which have non-interpolated out-
put levels.
Panner
Auto Pan
* = Interpolated; ( ) = Option of preceding parameter
25 190
25 190