Lexicon MPX G2 - Manual (Page 29)

Lexicon MPX G2 User Guide
2-2
Loading and Playing
with Programs
Pressing the front panel Program button accesses the MPX G2 library of 300
presets and user programs. In this mode, you can select and load programs,
select database sorting criteria and access the "Soft Row" — a selected set of
the most useful parameters for each program. You can also access Tap, A/B,
Mix and Patch functions, as well as selecting and bypassing effects in the
program. Each of these is described in this section.
Program Load When you press the Program button, its LED will light to let you know you're in
Program mode.
Auto Load
When first shipped, the MPX G2 will default to automatic program load, with all
of the programs available in numerical order from 1 to 300. The top line of the
display will show the DataBase sorting option "Sorted by number". The bottom
line of the display will show a program name. The large numeric display will show
the ID number of the displayed program.
Turn the knob to display and load other programs. An asterisk ( ✱ ) will appear
briefly before each program name before it loads.
Manual Load
To switch to manual program load, press System. Use the knob to select
Modes, then use the < and > buttons to display:
Press and hold the Pro-
gram button to display
the name and number of
the currently running program
In Manual Load, press the flash-
ing Program button to load the
displayed program.
while another program is displayed.
If the displayed program is currently
loaded, pressing and holding Pro-
gram will display the effect routing
assignment.
When loading programs, the knob
selects programs. The < and >
buttons jump to the next DataBase
sorting category.
Turn the knob to select Manual. In this mode, an asterisk ( ✱ ) before the program
name indicates that the displayed program is not loaded, and the flashing
Program button LED indicates that the program is cued for loading when
Program is pressed. (When the currently loaded program is selected, the
Program button LED will light steadily, and there will be no asterisk in the
display.)
Modes: Pgm Load
< >
Auto