Sweepfilter 1-band (m) – Lexicon MPX G2 User Manual

Page 108

Advertising
background image

7-17

The Effects and Parameters

* = Interpolated; ( ) = Option of preceding parameter

SweepFilter

1-Band (M)

92

190

50

190

Mix

0-100%

Dry/Wet ratio

Level*

Off, -89 to +6dB

Amount of effect in the processed signal

Fc*

20-20000Hz

Corner frequency offset of filter

FRes*

1-100

Filter resonance: 7=a maximally flat filter

Mod*

20-20000Hz

added to corner frequency offset to produce corner frequency

Scale*

-100 to +100%

scales Mod

Pan*

50L to C to 50R

Left/right pan control

SweepFilter simulates a Moog-

type resonant low-pass filter. Cut-
off frequency and output level are
interpolated, and can be swept.
The performance of this filter is
high enough that it can be used as
a lowpass filter for hiss reduction.

The parameters were de-

signed to allow synthesizer-like
control of the filter. For example:
Use FC like the manual “cutoff”
knob of an analog synth – set it to
the filter frequency desired when
all modulation sources are at mini-
mum.

Use Mod as the patch destina-

tion for as many as five modulation
sources (LFO, Rand, Env,
LastNote, etc.).

Use Scale as a master depth

control for all modulation sources.

Mix

0-100%

Dry/Wet ratio

Level

Off, -89 to +6dB

Amount of effect in the processed signal

Gain

-72 to +24dB

Boost/cut gain of filter

Fc

20-20000Hz

Center or corner frequency of filter

Q

0.1-10.0

Q of filter

Mode

LShlf, Band, HShlf

Determines EQ type

The 1-Band (M) effect provides

a single band of double-precision
parametric EQ with adjustable cen-
ter frequency, Q, boost/cut and
filter type (low shelf, band, high
shelf).

Advertising