Lexicon MPX G2 - Manual (Page 153)

Lexicon MPX G2 User Guide
9-14
Programs 90-94 are set up to have the MPX G2 front panel buttons or the MPX R1 control:
Tap = Record Loop
A/B = Layer
Delay = Clear Loop
90 Jam1 Chrs+
Loads with Chorus and Hall Reverb. Press Gain for boost. The MPX R1 Toe Switch
activates pedal control of volume or wah.
91 Jam1 Uni+
Loads with Univybe and Plate Reverb. Press Gain for overdrive. The MPX R1 Toe Switch
turns the pedal on or off.
92 Jam 1 S&H+
Loads with a Sample & Hold style effect into a large hall Reverb. The MPX R1 Toe Switch
activates pedal control of volume.
93 Jam1 Env+
Loads with an envelope filter and a plate reverb. Press Gain for overdrive, and Effect 1
for tremolo. The MPX R1 Toe Switch activates pedal control of volume.
94 Jam1Cordovox
A Cordovox effect with reverb. The MPX R1 Toe Switch turns the Cordovox effect on and
off, the pedal controls the Cordovox speed.
Programs 95-99 are set up to have the MPX G2 front panel buttons or the MPX R1 control:
Tap = Record Loop
A/B = Replace
Delay = Start/Stop Loop
95 Jam 2 Flange
Loads with Jet Flange and Hall Reverb. Press Gain for distortion. The MPX R1 Toe
Switch activates pedal control of volume or wah.
96 Jam 2 Phase
Loads with OrangePhase and Plate Reverb. Press Gain for Distortion. The MPX R1 Toe
Switch activates pedal control of volume or wah.
97 Jam 2 Pitch+
Loads with Distortion, Pitch and Ambience. The MPX R1 Toe Switch swaps pedal
controls between volume (Toe Switch off) and pitch (Toe Switch on).
98 Jam 2 Trem
Loads with an envelope filter and Plate Reverb. Press Gain for overdrive, and Effect 1
for tremolo. The MPX R1 Toe Switch activates pedal control of volume or wah.
99 Jam2AutoWah
Auto wah with analog tone and Chamber Reverb. The MPX R1 Toe Switch activates
pedal control of volume or wah.
JamMan
(Amp Input + FX Loop)