Mpx g2 specifications – Lexicon MPX G2 User Manual
Page 172
11-1
Specifications
11
MPX G2
Specifications
I/O
Instrument input:
mono 1/4 inch 1meg
Ω
unbalanced, with analog soft clipping circuit and front
panel input level control
Levels:
minimum +2.2dBu for full scale, maximum +10dBu max
A/D:
24-bit
Return Inputs:
stereo, 1/4 inch, 50k
Ω
unbalanced, with analog soft clipping circuit and
ganged level control on rear panel
Levels:
minimum –10dBu for full scale
maximum +18dBu max (for +4 nominal inputs)
+18 dBu with rear level pot at minimum
A/D:
24-bit
Main L and R Outputs:
1/4 inch TRS balanced (2), XLR 3-wire balanced (2)
Nominal Level:
front panel adjustable to +4dBu
Maximum Output Level:
balanced: +18dBu into 600
Ω
unbalanced: +21dBu into 100k
Ω
D/A:
24-bit
Send Output:
mono, 1/4 inch unbalanced
Nominal Level:
software adjustable to +4dBu
Maximum Output Level:
+18dBu into 100k
Ω
D/A:
24-bit
Audio performance
Frequency response:
20Hz to 20kHz;
+1 to -1.5dB for input to send
+1 to -1.5dB for return to output
THD+N:
<0.01%, at 1kHz nominal output level
.01% at 1kHz insert returns to main output
.01% at 1kHz input to main outputs
Dynamic Range:
Instrument input to send:
-110dB (unweighted) minimum Input to Send with Relay Bypass on
-120dB (unweighted) Input to Send with Noise Gate on
-97dB (unweighted) typical instrument to main outputs in Bypass
Sample rate:
44.1kHz
Return Mix:
When the Return Mix option is selected, MPX G2 will mix the analog Aux
inputs with the post converter output signal from the DSP.
Throughput delay
without send/return loop:
Input to Main Output <3ms, nominal