Voltage waveforms, F-23, 0 v 5 ms 0 volts – Lincoln Electric POWER MIG SVM157-A User Manual
Page 57: Troubleshooting and repair
Advertising
TROUBLESHOOTING AND REPAIR
F-23
F-23
POWER MIG 200
TYPICAL OUTPUT VOLTAGE WAVEFORM - MACHINE LOADED
(MAX TAP “G”)
10.0 V
5 ms
0 Volts
This is a typical DC output voltage wave-
form generated from a properly operat-
ing machine. Note that each vertical
division represents 10 volts and that
each horizontal division represents 5
milliseconds in time. The machine was
loaded with a resistance grid bank.
NOTE: Scope probes connected at
machine output terminals: (+)
probe to electrode, (-) probe to
work.
Volts/Div.................................10V/Div
Horizontal Sweep.................5 ms/Div
Coupling........................................DC
Trigger....................................Internal
SCOPE SETTINGS
MACHINE LOADED TO 200 AMPS AT 22 VDC
Advertising