Operation, Front panel controls and connections – Lincoln Electric LF-72 WIRE FEEDER IM847-D User Manual
Page 29
Advertising
B-3
OPERATION
B-3
ITEM
DESCRIPTION
1
Location for Optional Remote Voltage Control (See Accessory Section For Kit Number).
2
Location for Optional Burnback and Postflow Timer Kit (See Accessory Section For Kit Number).
3
Thermal LED, Motor Overload.
4
Cold Feed - Gas Purge Switch, press the switch up to feed wire with weld output off. Press the
switch down for gas flow with weld output off.
5
2 step - Trigger Interlock switch.
6
Wire Feed Speed Knob.
7
Gun Receiver Bushing.
8
Trigger Connector 5-pin amphenol for connecting the MIG gun trigger. See Installation Section
for detail.
LF-72
FRONT PANEL CONTROLS AND CONNECTIONS
CASE FRONT CONTROLS
FIGURE B.1
1
2
3
4
5
6
7
8
Advertising