Lanier LF215 - Manual (Page 138)

M AINTENANCE 7.5
7
Cleaning the Scanning Glass
Keeping the scanning glass clean helps ensure the best possible
copies. We suggest that you clean the scanning glass at the start
of each day and during the day, as needed.
1 Slightly dampen a soft lint-free cloth or paper towel with
water.
2 Open the control panel by gripping its top and pulling it.
3 Carefully wipe the scanning glass with a soft dry cloth.
If the glass is very dirty, first wipe it with a slightly
dampened cloth, and then with a dry cloth. Be very careful
not to scratch the glass surface.
4 Close the control panel firmly until it clicks into place.