Lanier LF215 - Manual (Page 152)

T ROUBLESHOOTING 8.9
8
[Incompatible]
The remote machine does
not have the requested
feature, such as a delayed
transmission.
It also occurs if the
remote machine does not
have enough memory
space to complete the
operation you are
attempting.
Reconfirm the remote machine’s
features.
[Jam 1] or
[No Cartridge] The toner cartridge is not
installed. Install the toner cartridge. See
page 1.9.
[Line Busy]
The remote person did not
answer or the line is
already engaged. Try again after a few minutes.
[Line Error]
Your machine cannot
connect with the remote
machine or has lost
contact because of a
problem with the phone
line. Try again. If the problem persists,
wait an hour or so for the line to
clear and try again.
Or, turn the ECM on. See
page 4.35.
Load Document
You have attempted to set
up a copy or fax operation
with no document loaded. Load a document and try again.
Low Heat Error
There is a problem in the
fuser unit. Unplug the power cord and plug it
back in. If the problem persists,
please contact a service
representative.
Open Heat Error
[Over Heat]
[LSU Error]
A problem has occurred in
the LSU (Laser Scanning
Unit). Unplug the power cord and plug it
back in. If the problem persists,
please call for service.
Memory Full
The memory is full. Delete unnecessary documents,
retransmit after more memory
becomes available or split the
transmission into more than one
operation.
[No Answer]
The remote fax machine
has not answered after
several redial attempts. Try again. Make sure that the
remote machine is operational.
Display Meaning Suggested solutions