Lanier LF215 - Manual (Page 145)

T ROUBLESHOOTING 8.2
Clearing Document Jams
When a document jams while it passes through the ADF
(Automatic Document Feeder), “[Document Jam]” appears on
the display.
1 Remove the remaining documents from the ADF.
2 Pull the jammed document gently out of the ADF and skip
to step 5.
If there is any resistance and the document does not move
when you pull it, continue to the next step.
3 Open the control panel by gripping its top and pulling on it.
4 Pull the document gently out of the ADF and close the
control panel.
5 Load the documents back into the ADF.
N OTE : To prevent document jams, do not use thick, thin or mixed
documents.