Lanier LF215 - Manual (Page 48)

G ETTING S TARTED 1.33
1
Setting Sounds
You can control the following sounds:
• Ringer: You can adjust the ringer volume.
• Key Sound: With this option set to “On,” a key tone sounds
each time any key is pressed.
• Alarm Sound: You can turn the alarm sound on or off. With
this option set to “On,” an alarm tone sounds when an error
occurs or fax communication ends.
• Speaker: You can turn on or off the sounds from the
telephone line through the speaker, such as a dial tone or a
fax tone. With this option set to “Comm.,” the speaker is on
until the remote machine answers.
You can adjust the speaker volume level using the On Hook
Dial
button .
Speaker, Ringer, Key Sound and Alarm Sound
1 Press Menu until “Sound/Volume” appears on the top line
of the display.
2 Press the scroll button ( or ) to scroll through the options.
Press Enter when you see the sound option you want.
3 Press the scroll button ( or ) to display the status or
loudness you want for the option you have selected.
For the ringer volume, you can select from “Off”, “Low”, “Med”
and “High”. Setting “Off” means that the ringer turns off. The
machine works normally even if the ringer is turned off.
4 Press Enter to save the selection.
5 If necessary, repeat steps 2 through 4.
6 To return to Standby mode, press Clear/Stop.