Lanier LF215 - Manual (Page 84)

F AXING 4.17
4
5 Enter the number you want to store using the number
keypad and press Enter.
To insert a pause between numbers, press Redial/Pause.
A symbol “-” appears on the display.
6 To assign a name to the number, enter the name you want.
For details about entering characters, see page 1.29.
OR
If you do not want to assign a name, skip this step.
7 Press Enter when the name appears correctly or without
entering a name.
8 To store more fax numbers, repeat steps 4 through 7.
OR
To return to Standby mode, press Clear/Stop.
Sending a Fax using a Speed Number
1 Feed the document(s) face up into the ADF.
For details about loading a document, see page 4.5.
2 Adjust the document resolution to suit your fax needs. See
page 4.6.
If you need to change the darkness, see page 4.3.
3 Enter the speed dial number.
• For a one-digit speed dial number, press and hold the
appropriate digit button.
• For a two or three-digit speed dial number, press the first
digit button and hold the last digit button.
The corresponding entry’s name briefly displays.
4 The document scans into the memory.
The fax number stored in the speed dial location is
automatically dialed. The document is sent when the
remote fax machine answers.