Lanier LF215 - Manual (Page 142)

M AINTENANCE 7.9
7
Setting the Notify Toner Option
If you have set the Notify Toner menu option to “On”, your
machine automatically sends a fax to your service company or
the dealer to notify them that your machine requires a new
toner cartridge when the toner cartridge needs to be replaced.
The fax number is preset by your dealer when you bought your
machine.
1 Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
The first available menu item, “Clean Drum,” displays on
the bottom line.
2 Press the scroll button ( or ) to display “Notify Toner ”
on the bottom line and press Enter.
3 Press the scroll button ( or ) to change the setting.
Select “On” to enable this feature. Selecting “Off” disables
this feature.
4 Press Enter to save the selection.
Cleaning the Drum
If there are streaks or spots on your print, the OPC drum of the
cartridge may require cleaning.
1 Before setting the cleaning procedure, make sure that
paper is loaded in the machine.
2 Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
The first available menu item, “Clean Drum,” displays on
the bottom line.
3 Press Enter.
4 When the display asks you to confirm your selection, press
Enter.
The machine prints a cleaning page. Toner particles on the
drum surface are affixed to the paper.
5 If the problem remains, repeat steps 1 through 4.