Linksys PSUS4 - Manual (Page 15)

8 Chapter 4: Installing the PrintServer using the Setup Wizard
Installation
PrintServer for USB with 4-Port Switch
6. The Password screen, Figure 4-4, will appear next. Enter the default password admin in the field. Click
Enter.
7. The Basic Settings screen, shown in Figure 4-5, will appear. If you want to change the Device Name or
Domain Name, enter the Device Name and Domain Name in the respective fields. Click Next.
Click Back to return to the previous screen.
Figure 4-4: Password
Figure 4-5: Basic Settings