Linksys PSUS4 - Manual (Page 20)

13 Chapter 5: Windows Driver Installation
Installation
PrintServer for USB with 4-Port Switch
5. The next screen to appear is Select Program Folder, shown in Figure 5-4. An icon will be added to the
program folder listed. You may change the name for the program folder, if you wish. Click Next.
Click Back to return to the previous screen. Click Cancel to end the driver installation.
6. The next screen that may appear while the driver is being installed, is shown in Figure 5-5.
Click Cancel to end the driver installation.
7. When the driver is installed, the Setup Complete screen, Figure 5-6, will appear. The Print Driver must still be
configured, so make sure that Configure Print Driver now is selected. Click Finish to continue.
Figure 5-6: Setup Complete
Figure 5-4: Select Program Folder
Figure 5-5: Copy Folder