Linksys PSUS4 User Manual
Page 38
31
PrintServer for USB with 4-Port Switch
Chapter 8: Bi-Admin Management
The Bi-Admin Management Utility
•
Printer Status. This option allows you to view the printer status, and set port and printer parameters.
If you click this option, a Verify Password screen will appear, as shown in Figure 8-11. Make sure that you
enter the password in the field before you click OK or an Incorrect Password message will appear. If the
message appears, then click OK, enter the correct password in the field, and click OK again.
After the password is successfully entered, the Printer Status screen will appear, as shown in Figure 8-12.
The Device Name will be displayed and USB Printer Port will be highlighted. The status information for the
port will be displayed.
Click the Back button to return to the Bi-Admin Management Utility screen. Click Refresh to refresh the
screen.
If the printer is Bi-directional, and is not busy, the Printer Configuration button will appear, as shown in
Figure 8-13. If the items are not read only, you can change the Environmental Variable and Variable Value
items based on the options of your printer.
For more information, click the Help button.
Figure 8-12: Printer Status
Figure 8-13: Printer Configuration