Lexmark 4059-XXX - Manual (Page 244)

5-19 4059 Service Manual
4059-XXX
Duplex Option Board
Note: Duplex connectors J10 and J11 are interchangeable. No
problem results if the connectors are switched.
Connector Pin No. Signal
J1 Motor 1 Motor -
2 Motor +
J2 DC Motor
Sensor/Encoder Board 1 +5 V dc Sensor
2 Tach +
3 Ground
J3 Stepper Motor 1 STPMOTA -
2 STPMOTA +
3 STPMOTB -
4 STPMOTB +
J4 Fan 1 +24 V dc
2 Fan On -
J5 Paper Input Sensor 1 +5 V dc Sensor
2 Input +
3 Ground
J6 Rear Cover
Open Switch
(Level 2 does not use) 1 Top Cover Open +
2 Ground
J7 Jam Removal Tray
Open Switch
(Level 2 does not use) 1 Front Drawer Open +
2 Ground
J8 Paper Exit Sensor 1 +5 V dc Sensor
2 Exit +
3 Ground