Lexmark 4059-XXX - Manual (Page 30)

2-3 4059 Service Manual
4059-XXX
910 DC Pick
Motor DC Pick
Motor Stall Error Codes 910,911,912,913 and 914 are indications
that a Tray 1 paper feed problem has been detected. Go
to the
“Input Tray(s) Option Service Check” on
page 2-58 .
911 DC Pick
Motor Excessive
PWM
912 DC pick
motor below
speed
913 DC pick
motor over speed
914 DC pick
motor: No
encoder feedback
917 Transfer Roll Indicates a problem in the transfer roll area. Go to the
“Transfer Roll Service Check” on page 2-105 .
920 Fuser Error Indicates that the fuser is below temperature when
printing. Go to the
“Cold Fuser Service Check” on
page 2-48 .
921 Fuser Error Indicates that the fuser is below standby temperature
when the printer is idle. Go to the
“Cold Fuser Service
Check” on page 2-48 .
922 Fuser Error Fuser failed to reach standby temperature. Go to the
“Cold Fuser Service Check” on page 2-48 .
923 Fuser Error Fuser is too hot during printing or when printer is idle. Go
to the
“Hot Fuser Service Check” on page 2-50 .
924 Fuser Error An open circuit has been detected in the Fuser
Thermistor Circuit. Go to the
“Hot Fuser Service Check”
on page 2-50 .
925 Fuser Error Wrong fuser lamp installed. Check the fuser lamp for the
correct type of lamp that should be installed.
927 Fan Stalled Indicates a printer fan stalled. Go to the “Fan Service
Check” on page 2-47 .
928 Erase Lamps Indicates that the engine has detected that either the
erase lamp assembly is missing or disconnected. Go to
the
“Erase Lamp Service Check” on page 2-46 .
Error Code Action