Lifescan UltraSmart - Manual (Page 19)

10
Coding the Meter
Code numbers are used to calibrate the OneTouch ®
UltraSmart ™ Meter with the OneTouch ® Ultra ™ Test
Strips for accurate results. You must code the meter
before using it for the first time and then every time
you change to another vial of test strips. Each time
you test, check to be sure that the code number on
the meter display matches the code number on the
test strip vial.
Insert a OneTouch ® Ultra ™ Test Strip to
turn on the meter. Push it all the way in
until it will go no further. “OneTouch
UltraSmart” will appear on the display
briefly.
CAUTION: Failure to code the meter correctly will cause
inaccurate test results.
Enter the Code Mode. STEP 1
DCO_06158108A_OUS_OB_GB 5/6/03 1:24 PM Page 10